3.21. Replacement of the fuel filter


1. The fuel filter by means of a collar of spring type is fixed on a partition of a motive compartment near assembly of GTTs with the vacuum amplifier of brakes.
2. Dump pressure in a power supply system (see the Head of the Power supply system and release), then disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action!

3. Release the filter from a fixing spring collar and disconnect from it inlet and final fuel pipes.

And — the Collar of fastening of a final fuel hose
In — Assembly of the fuel filter
With — the Spring collar

4. Pay attention to marking of knots of connection to the filter of inlet and final fuel pipes. Correctly installed filter has to the top is developed by the final union.
5. Connect inlet and final fuel pipes to assembly, having tracked reliability of tightening of fixing collars. Connect a negative wire to the battery, start the engine and check the filter and fuel pipes for existence of signs of leak of fuel.