12.6. Removal and installation of the forward stabilizer of cross stability


1. Cock the parking brake and prop up antiretractable boots back wheels. Weaken nuts of fastening of forward wheels. A car front also establish to Poddomkratta it on props. Remove wheels.
2. Disconnect racks of the stabilizer of cross stability from both control levers of a suspension bracket.

3. Remove collars of basic plugs of a bar of the stabilizer of cross stability.

4. Remove assembly of a bar of the stabilizer.
5. After extraction of a bar remove from it homutny assemblies and carefully check a condition of rubber plugs. In case of identification of signs of destruction of material replace defective components.
6. Installation is made upside-down. Track that plugs were deployed by cuts forward, and all fixture was tightened with the required effort.