11.9. Replacement of the dosing valve regulator


 On models 1993 and 1994 of of the issue the dosing valve regulator is built in assembly of GTTs.

1. On models since 1995 of the issues which are not equipped with system of anti-blocking of brakes (ABS) two dosing valves regulators are provided, both of them are screwed in assembly of GTTs. On models with ABS separately installed valve regulator is used.
2. Valves regulators are not subject to service and if wheels when braking begin to be blocked ahead of time the car should be driven away for check on car repair shop, - the special manometer will be required.
3. If the valve allows leaks or is otherwise damaged, release a special cap key with a cutting head a nipple nut, then you otboltit the valve from a basic arm and turn out it from assembly of the main brake cylinder. After performance of replacement of the valve pump over the brake system (see the Section Pumping of the Brake System).